- IMG_1347.jpeg (189.69 KiB) Viewed 50 times
- IMG_1345.png (485.12 KiB) Viewed 50 times
The clock displays the time with text, in 5-minute intervals. The minutes within the 5-minute interval are displayed by little red spots in the corners of the panel. In the programmed version, a slider is added under the panel, to indicate the seconds within the current minute.
The program works well on iPhones and iPads.
Anyone who cares to do the English version?
The code for this Dutch version follows:
Code: Select all
' Another clock (Dutch version, for iPhones and iPads)
' Idea and physical versions by www.qlocktwo.com
' September 2025 by Henko
pR=0.75 ! pG=0.75 ! pB=0.75 ' panel color
cR=0 ! cG=0 ! cB=0.6 ' character color
init_prog()
ct$=get_clocktext$()
do slowdown
u=current_hour() ! m=current_minute() ! s=current_second()
if s<>so then ! seconds_bar(s) ! so=s ! end if
if m=mo then continue else mo=m
init_panel(ct$)
if u=12 and m<16 then u=u else u=u%12 ! u1=u+1
mm=m%5 ! m5=m-mm
draw color cR,cG,cB ! draw alpha 1
highlight(0,1,0,0)
if m5=0 then highlight(.uur(u),22,0,0)
if m5=5 then highlight( 2,5,.uur(u),0)
if m5=10 then highlight(3,5,.uur(u),0)
if m5=15 then highlight(6,8,.uur(u),0)
if m5=20 then highlight(3,4,7,.uur(u1))
if m5=25 then highlight(2,4,7,.uur(u1))
if m5=30 then highlight(7,.uur(u1),0,0)
if m5=35 then highlight(2,5,7,.uur(u1))
if m5=40 then highlight(3,5,7,.uur(u1))
if m5=45 then highlight(6,9,.uur(u1),0)
if m5=50 then highlight(3,4,.uur(u1),0)
if m5=55 then highlight(2,4,.uur(u1),0)
corner(mm)
until forever
end
def init_prog()
graphics ! graphics clear 1,1,1 ! draw color 0,0,0
set orientation portrait
get screen size .sw,.sh
.marge=int(.sw/56) ! .tl=.sw-2*.marge
.fs=.tl/6.615 ! .dx=0.6043*.fs ! .dy=0.65*.fs
.mo=-1
end def
def init_panel(t$)
fill color .pR,.pG,.pB
fill rect .marge,.marge to .sw-.marge,.sw-.marge
s=0
draw font size .fs ! draw color 0,0,0 ! draw alpha 0.1
for i=0 to 9
y=.fs*i*0.65
a$=mid$(t$,s,11) ! s+=11
draw text a$ at .marge,y
next i
end def
def highlight(a,b,c,d)
draw text .w$(a) at .marge+.wx(a)*.dx,.wy(a)*.dy
draw text .w$(b) at .marge+.wx(b)*.dx,.wy(b)*.dy
if c then draw text .w$(c) at .marge+.wx(c)*.dx,.wy(c)*.dy
if d then draw text .w$(d) at .marge+.wx(d)*.dx,.wy(d)*.dy
end def
def corner(k)
m=.marge
fill rect m,m to m+5,m+5
fill rect .sw-m-5,m to .sw-m,m+5
fill rect .sw-m-5,m+.tl-5 to .sw-m,m+.tl
fill rect m,m+.tl-5 to m+5,m+.tl
fill color 1,0,0
if k>=1 then fill rect m,m to m+5,m+5
if k>=2 then fill rect .sw-m-5,m to .sw-m,m+5
if k>=3 then fill rect .sw-m-5,m+.tl-5 to .sw-m,m+.tl
if k>=4 then fill rect m,m+.tl-5 to m+5,m+.tl
end def
def seconds_bar(s)
if not init then
init=1 ! m=.marge ! y=.sw-m+20
slider "seconds" value s/59 at m,y size .sw-2*m
end if
slider "seconds" value s/59
end def
def get_clocktext$()
dim .w$(23),.wx(23),.wy(23),.uur(13)
for i=0 to 22 ! read .w$(i),.wx(i),.wy(i) ! next i
for i=1 to 12 ! read .uur(i) ! next i
data "HET",0,0, "IS",4,0, "VIJF",7,0, "TIEN",0,1
data "VOOR",7,1, "OVER",0,2, "KWART",6,2, "HALF",0,3
data "OVER",7,3, "VOOR",0,4, "EEN",7,4, "TWEE",0,5
data "DRIE",7,5, "VIER",0,6, "VIJF",4,6, "ZES",8,6
data "ZEVEN",0,7, "NEGEN",6,7, "ACHT",0,8, "TIEN",4,8
data "ELF",8,8, "TWAALF",0,9, "UUR",8,9
data 10,11,12,13,14,15,16,18,17,19,20,21
t$=""
t$&="HETKISAVIJFTIENATZVOOR"
t$&="OVERMEKWARTHALFSPMOVER"
t$&="VOORTHGEENSTWEEAMCDRIE"
t$&="VIERVIJFZESZEVENONEGEN"
t$&="ACHTTIENELFTWAALFPMUUR"
return t$
end def